Industries
Steam and thermal solutions for your industry
Explore i-Kcal steam and thermal energy solutions for textile, corrugated packaging, plywood, dairy, tyre & rubber and other process industries — improving steam efficiency, heat recovery and plant performance.
Industry solutions
Choose your industry
Detailed solutions, benefits and results for the industries where we work most.
-
Process plants Chemical Less steam for every batch: flash and vent steam goes back into the process as usable steam, and the Jetomat’s variable nozzle follows the load as it swings. Chemical solutions -
Heating & bonding Corrugator Less fuel for every tonne of corrugated board: flash steam goes back into the hot plates instead of up the vent, and the steam traps come off the machine. Corrugator solutions -
SMP dryers Dairy Use your dairy's steam twice: flash steam back into the process, the spray-dryer air heater held at temperature, and hot water from steam with less of it. Dairy solutions -
Paper machines Paper & Tissue Less steam for every tonne of paper: a variable-nozzle Jetomat on each dryer group takes the blow-through back into the group, so the drums drain at speed and the steam per tonne comes down. Paper & Tissue solutions -
Hot press · Dryer Plywood Less steam for every press cycle: condensate leaves the platens by suction, and flash steam goes back into the press instead of up the vent. Plywood solutions -
Drying & conditioning Textile Less steam per metre of fabric: Jetomat thermocompressors replace the control valves on drum dryers and wash baths, and the traps come off. Textile solutions -
Curing presses Tyre & Rubber Less steam for every tyre cured: one variable-nozzle Jetomat per bank of presses keeps steam moving through every mould and sends the condensate home hot and closed. Tyre & Rubber solutions
Industries we serve
Also at work in
Beyond the seven above, our steam, condensate and heat-recovery solutions run in these process industries too.
-
Brewery -
Oil & Gas -
Pharma
Not sure where your plant is losing steam?
Tell us about your process and steam system. Our engineers will identify the savings opportunities for your industry and estimate the payback — free.